• <th id="tiavd"></th>
    <th id="tiavd"></th>
    <tbody id="tiavd"><pre id="tiavd"></pre></tbody>
    1. <rp id="tiavd"></rp>
      1. 歡迎訪問濟南立強模具有限公司!



        來源:http://www.lasagnafarm.com/ 日期:2021-11-27

        、Jinan injection mold manufacturers today to tell you that usually used by the mold is composed of what, they play a role in what.
        The mould is mainly composed of pouring system, temperature regulating system, molding parts and structural parts. In the plastic mold, the casting system and the molded parts are the parts in direct contact with the plastic, which are the most complicated, changeable parts in the plastic mold and require the highest machining smoothness and precision.
        The injection mould is composed of a moving mould and a fixed mould. The moving mould is installed on the moving mould of the injection molding machine, and the fixed mould is installed on the fixed mould of the injection molding machine. The gating system and the cavity are formed by the closing of the moving and fixed moulds in the injection molding process. In order to reduce the workload of mould design and manufacture, most injection moulds adopt standard mould bases at present.
        Let’s talk about the gating system inside the injection mold first
        The injection molding system is the part of the runner before the plastic enters the cavity from the injection nozzle, including the main runner, the cold material hole, the branch runner, the gate and so on.
        A casting system, also known as a runner system, is a series of feeding channels that guide the plastic melt from the injector nozzle to the cavity, usually including the main runner, distributor, gate, and cold pockets. Its formability is closely related to the molding quality and production efficiency of plastic products.
        Today first said here, detailed understanding of the injection mold inside the temperature control system and other parts, attention to the following for everyone to introduce.

        相關產品 / Related products



        網站地圖    TXT    XML
      2. <th id="tiavd"></th>
        <th id="tiavd"></th>
        <tbody id="tiavd"><pre id="tiavd"></pre></tbody>
        1. <rp id="tiavd"></rp>